Manual call point is a small square plastic enclosure that you see in every building, but paid very little attention to it. Manual call point (or referred to as MCP, call point or fire point) is an activation device that triggers the fire alarm by sending out signal to sirens for alert.
It is placed in strategic fire points throughout the building for manual trigger of the fire alarm system. This is distinguished from the other detection devices (input devices) which are automatically triggered. The manual element of the device thus means that it needs to be activated by hand.
An important point for manual call point is the placement in the building. It should be clearly visible (red color), at an easily accessible height level and at intervals where the person detecting the fire does not have to run too far to activate the call point.
Some of the common manual call points types include:
Pull Station
This type of manual fire alarm activation device is more commonly found in US and Canada. The manual device is activated by pulling a lever. The pulling lever can be designed to have a single action mechanism or dual-action mechanism. In dual-action types, the user has to lift up first then pull down, which discourages mishandling. The device can only be restored to its original position with a special key tool.
Manual Call Point
These are European standard manual fire alarm activation device that are commonly adopted worldwide (except North America). It is made of a plastic enclosure with a plate that will drop down when pushed. When the element is pushed, it will complete a circuit which notifies the fire alarm system of the zone or exact location where it is activated. Like its fire alarm pull station counterparts, it can only be restored to its original position with a special key tool.
Manual Call Point/Pull Station with Cover
This is a manual call point/pull station covered with a plastic cover. This creates a two-step process which discourages mishandling and false alarm.
Addressable Manual Call Point / Pull Station
This is an addressable version of manual call point/pull station. It is often the same brand with fire alarm system used, for compatibility.
Hazardous Area Explosion Proof / Intrinsically Safe Manual Call Point
This type of manual call point is used in explosion-prone environment such as oil refinery, nuclear plant or chemical factory where the device itself needs to be sturdy and waterproof to retain its function in case of emergency. The enclosure is often made with GRP or aluminum, and it is sealed with an IP rating of IP66 or IP67 in order to be certified. Because of the special application, it can be installed outdoor or in dusty areas. The device is also modified so that the energy entering the device cannot generate enough heat to start ignition.
As with most fire alarm system devices, manual call points used in the context of fire emergency would be color-coded in red. In other instances, such as access control or other non-fire related matters, colors such as green, yellow or blue may be used. A simple guideline of color is listed as below:
Red – Fire System
Orange – Smoke & Vent Control
Green – Emergency Door Exit / Access Control / Lift & Escalator Control
Yellow – Suppression System Activation / General Evacuation
Purple / White – Others
For more information on manual call point, please consult one of our specialists.